Vmware Horizon Client 4.10 Download Mac Updated

byCates Sweeme45 -
0

Vmware Horizon Client 4.10 Download Mac

Navigation

This commodity applies to all versions of Horizon Client for Windows, including versions 2203 and 5.v.four.

💡 = Recently Updated

Change Log

Horizon Customer Versions

Starting Baronial 2020, the client versioning changed to a YYMM format. Horizon Client 2203 is the latest release.

  • Horizon 8.x no longer supports Horizon Customer 5.10 and older.
  • Features, similar ThinPrint, were removed from Horizon Customer 2006 and newer, so don't apply the 2xxx clients with Horizon 7.13 and older.
  • Full Teams Optimization is bachelor with Horizon Client 2006 for Windows and newer connecting to Horizon Amanuensis 2006 and newer.
    • Full Teams Optimization is available with Horizon Client five.v connecting to Horizon Agent vii.xiii. Some newer Teams features require Horizon Client 5.five.4 or Horizon Customer 2111 or Horizon Customer 2203. Newer Horizon Clients back up more than Teams features.
    • Teams Optimization on Mac requires Horizon Client 2103
    • Teams Optimization on Linux requires Horizon Client 2106
    • Teams Optimization in RDS Published applications requires Horizon Client 2012
  • Windows 21H2 and Windows 11 are supported with Horizon Client 2111.
  • Horizon Client 2006 and newer no longer support Windows 7, Windows eight.1, or Windows x 1809.

The Software Updates feature of Horizon Client 5.5 volition not upgrade to Horizon Client 2006 or newer. Instead, you must manually download Horizon Client 2006 or newer and install it.

Horizon Customer five.5.3 and newer resolve security vulnerabilities.

Connexion Server can exist configured to prevent older clients from connecting. Find information technology in the Global Settings node in Horizon Console.

Windows 10 / Windows 11 Support

  • Windows 10 21H2 and Windows 11 are supported with Horizon Customer 2111 (8.iv) and newer.
  • Windows 10 21H1 is supported with Horizon Client 2103 (8.2) and newer.
  • Windows ten 20H2 is supported with Horizon Client 2012 (8.1) and newer.
  • Windows ten 2004 is supported with Horizon Client 2006 (8.0) and newer
  • Windows x 1909 is supported with Horizon Client five.3 and newer
  • Windows 10 1803 is supported with Horizon Customer 4.8 and newer

Manual Installation of Horizon Client

The Horizon Clients can exist downloaded from http://www.vmware.com/go/viewclients.

  1. Logon to the client machine equally an administrator. Administrative rights are required for the Horizon Customer installation. You tin can also push the client silently as described in the next section.
  2. Open a browser and enter the name of your Horizon Connectedness Server in the address bar (due east.g. https://view.corp.local). Utilize https://.
  3. Click the Install VMware Horizon Client link. If the Horizon Clients are installed on the Connection Server, the client volition download immediately. Or, yous'll be taken to vmware.com to download the client.
  4. If you are redirected to the Clients download page (https://customerconnect.vmware.com/en/downloads/info/slug/desktop_end_user_computing/vmware_horizon_clients/horizon_8), and then find the VMware Horizon Client for Windows, and click Go to Downloads. Note: if you are running Horizon 7, then use the Change Version drop-down to select Horizon vii (v.0) instead of Horizon viii.

  5. Then click Download Now.
  6. On the customer machine, run the downloaded VMware-Horizon-Client-2203-8.5.0.exe or VMware-Horizon-Client-5.5.4.exe.

    • If yous want to employ the URL Content Redirection characteristic in Horizon seven and newer, run the installer with the post-obit switch: /five URL_FILTERING_ENABLED=1
  7. Click Agree & Install. Or yous can clickCustomize Installation. Horizon Client 2203 and newer has an pick to Enable Keylogger Blocking, but only in Custom installation.
    1. If yous selected Customize Installation, you tin can enter a Default connexion server, install Skype Pack, Teams Optimization, etc.
    2. Horizon Client 2203 and newer has an option to Enable Keylogger Blocking, simply only in Custom installation.
    3. Click Agree & Install when done.
  8. In the Success page, click Finish.
  9. Click Restart Now when prompted to restart.
  10. Annotation: Horizon Customer 2106 and newer have an updated user interface.

Verify URL Redirection

  1. To verify that URL Content Redirection is installed, verify the presence of the fileC:\Program Files (x86)\VMware\VMware Horizon View Client\vmware-url-protocol-launch-helper.exe.
  2. There's also an IE add-on.
  3. URL Content Redirection is configured using group policy.

Software Updates

  1. In the Horizon Client, click the hamburger icon on the pinnacle right, and click Software Updates. Note: Horizon Client 5.5 will not offering an upgrade to Horizon Client 2006 or newer.



  2. Horizon Customer 2012 (eight.1) and newer have an selection to Show popular-upwardly bulletin when in that location is an update. The Horizon GPO Templates for Horizon Customer take GPO settings to command this. The settings are Update message pop-up and Let user to skip Horizon Client update.

Install – Horizon Client Silent

Installing Horizon Client From the Control Line at VMware Docs has instructions on how to install the Horizon Client silently. Common methods for installing the customer silently include: SCCM and Active Directory Grouping Policy Computer Startup Script.

Launch Horizon Client

To launch a View Desktop or application manually:

  1. From the Beginning Menu run VMware Horizon Customer.
    1. Horizon Client 4.7 and newer has a GPO setting to prevent the Client from being launched multiple times.
    2. Install the Horizon GPO templates if you haven't already.
    3. Create or edit a GPO that is linked to an OU containing the Horizon Customer machines. These are the finish-user PCs, not the virtual desktops.
    4. The Block multiple Horizon Client instances per Windows session setting is atComputer Configuration | Policies | Authoritative Templates | VMware Horizon Client Configuration.

  2. To modify SSL certificate verification:
  3. If at that place is no server in the list, then use the New Server button on the acme left or clickAdd together Server on the top right.

  4. Enter the load balanced FQDN for the Connection Server and click Connect.

  5. You can click the Options menu to Hibernate the selector after launching an item.

  6. If you want to perform pass-through authentication, click the hamburger icon, and selectLog in as current user. This choice is only available if selected during installation, the client machine was rebooted, and is not prohibited using group policy. Also, the Connection Server must allow Log on every bit current user.

  7. Horizon seven.two and newer takeRecursive Unlock, which is enabled past default. SeeUsing the Log In as Current User Characteristic Available with Windows-Based Horizon Client at VMware Docs.
  8. If you have apps published to an Unauthenticated User, click the hamburger icon, and select Unauthenticated access or Log in anonymously using Unauthenticated Admission.

  9. Before connecting to the server, click Settings so switch to the VMware Smash page. Or click the hamburger icon and so click Configure VMware Boom.

  10. In Horizon Customer 4.eight and newer, network condition is adamant automatically and no longer configurable in the customer.
    1. If your Horizon Customer is older than 4.8, and then adjust the network status and click OK. This affects TCP vs UDP for Smash connectivity. Excellent = TCP just. Typical = UDP if the ports are open. Poor = UDP plus bundle duplication, which is best for xx% bundle loss networks. More info in the Technical White Paper VMware Blast Extreme Display Protocol in Horizon 7.
  11. You can optionally enableAllow High Colour Accuracy.

  12. In Horizon Client 2106 and Horizon Amanuensis 2106 and newer, High Efficiency Video Decoding (HEVC) is enabled by default.
  13. Horizon Client v.ii and newer have an option to Let Blast connections to use operating organization proxy settings, which is deselected by default. You can configure a client-side group policy to enable proxy. Or users can manually enable it.
  14. Double-click the server.

  15. If the certificate is not trusted, clickBear witness Document, and and then clickKeep. To disable this prompt, see Certificate Validation below.

  16. Enter your username and password, and then click Login.

  17. If y'all encounter besides many domains in theDomain list:
    1. You tin filter them by running the vdmadmin -N command. SeeConfiguring Domain Filters Using the ‑N Choice at VMware Docs.
    2. Horizon 7.1 and newer have an pick to Hide domain list in client user interface. If you enable this in Global Settings, then users must enter UPN, or Domain\Username. This is the same place y'all can configure Horizon to send the Domain List to the client.

  18. If any of your published applications or desktops are configured with a Category Folder, clickYes when asked for shortcuts to announced in your Start Menu or desktop.


    • Horizon Customer five.1 and newer have an interesting command line switch -installShortcutsThenQuit that connects to a Connection Server, creates the shortcuts on Beginning Carte and Desktop, and then quits. Here is sample syntax: 
      vmware-view.exe -serverURL serverurl -loginAsCurrentUser true -installShortcutsThenQuit
  19. If any of your published awarding icons havePre-launch enabled, so a session will be started on i of the Horizon Agents that hosts the icon. All information technology does is create a session; the icon that Pre-launch was enabled on is not launched until the user double-clicks the icon. When the user launches whatsoever icon published from the Horizon Amanuensis, information technology volition launch quickly.
    • Afterwards the user closes the Horizon Customer, the Pre-launch session remains disconnected for the elapsing specified in the RDS Farm.
  20. If you have a agglomeration of icons, click one of the icons and so start typing in the name of the icon and it will highlight.
  21. If the pool settings allow it, you lot can right-click an icon so select a protocol. VMware Blast is the recommended protocol.


    1. When editing a pool, you can strength users to use a item protocol by setting Allow Users to Choose Protocol = No.
    2. In Horizon Console, at Monitor > Sessions, if you lot scroll to the right you tin can see which Protocol the clients are using.
  22. Horizon Customer five.2 and newer let you synchronize num lock and cap lock status.
    1. Right-click a desktop icon and click Settings.

    2. The left side of the screen shows all published desktops. On the right, enable the option to Automatically synchronize the keypad, scroll, and cap lock keys.

    3. You tin also automatically enable this setting by configuring a client-side grouping policy setting.
  23. Either double-click an icon, or correct-click an icon, and click Launch.

  24. When connecting, y'all might exist prompted to access your local files.

  25. If yous are connected to a remote desktop, yous can use the menu at the top of the screen, click the iii dots, and then click Settings.. An interesting choice is Autoconnect to this Desktop. This setting is stored on the Horizon Connexion Server in LDAP and there doesn't appear to exist whatsoever style to automate enabling it.


  26. In Horizon Customer four.four and newer, administrators can enable a Desktop Pool Setting that allows users to Restart the remote desktop gracefully.

  27. Horizon Agent vii.xi and newer with Horizon Client 5.three and newer tin show the client's bombardment status in the remote desktop. The user will take to click the upwards arrow in the system tray to see the battery icon. The battery icon is shown in both single-user Virtual Desktops and multi-user RDS Desktops.
  28. Horizon Customer 5.2 and newer accept client-side group policy settings to define a hotkey combination for grabbing and releasing input focus.
  29. The Horizon Customer also has a taskbar jump list showing recently launched applications and desktops.
  30. Some of the bill of fare items in Horizon Customer 5.0 and newer can be subconscious by configuring Grouping Policy using the Horizon GPO Templates.

VMware Fling View Auto-Connection Utility: The View Car-Connection Utility allows you to connect the VMware View Client automatically into a View desktop or an application pool when the system starts up.

Shortcuts and Favorites

In the Horizon Customer, in one case you are connected to a server, you can right-click an icon and click Create Shortcut to Desktop or Add to Commencement Bill of fare.

In the Horizon Client, each desktop/app icon has a star icon y'all tin can click, or right-click an icon and Mark as Favorite. Favorites are stored in the LDAP database on the Horizon Connection Server.


  1. On the pinnacle right of the Horizon Client, y'all can switch to the Favorite view so that only icons selected as Favorites are displayed.

  2. Or switch back to the All View by deselecting the Favorite push.

Back up information

  1. In Horizon Client 2106 and newer, in the menu is Virtually VMware Horizon Client.
    1. Or on the Question Marking menu is Back up Information.
  2. Users can click this to observe the client proper noun, customer operating system, Horizon Client version, the Horizon Connection Server proper noun, and entitled desktops.

Document Validation

When you connect to a Horizon Connexion Server, and if the certificate is non trusted or valid, then the user is prompted to have the certificate. You can disable this prompt for whatsoever customer auto that can be controlled using group policy.

  1. Copy the Horizon .admx files to PolicyDefinitions if you oasis't already.
  2. Create a GPO that is linked to an OU containing the Horizon Client machines. These are the end-user PCs, not the virtual desktops.
  3. Edit the GPO.
  4. Go to Computer Configuration | Policies | Authoritative Templates | VMware Horizon Customer Configuration | Scripting Definitions.
  5. On the correct, double-click Server URL.
  6. Set the URL to your Horizon View URL, and click OK.
  7. On the left, click Security Settings. On the correct, open the setting Document verification mode.
  8. Enable the setting and make your pick. No Security volition disable the certificate prompt. So click OK.

Device Redirection

Client Bulldoze Redirection

  1. When you connect to a Horizon Agent that has Client Drive Redirection enabled, yous are prompted to permit file redirection.

  2. Past default, only the user's local contour is redirected.
  3. You lot tin redirect more than folders or drives by opening Settings, or click the Options bill of fare, and click Share Folders.

  4. In the Bulldoze Sharing tab (or Sharing tab), add drives or folders, and then click OK.

  5. The folders or drives you added are now visible within Explorer in the Horizon Desktop.
  6. Client Drive Redirection also works in published applications.
  7. Horizon Agent 7.vii and newer with Horizon Client 4.ten and newer allow you drag files from the local car into the remote machine. This is elevate merely. You can't copy/paste. If yous drag the file onto a remote application, and then and then application opens the file.
    1. This feature can be disabled and/or controlled in a GPO that applies to the Horizon Amanuensis. Make sure the Horizon 7.seven or newer GPO templates are installed. In the Computer half of the GPO, get to Administrative Templates > VMware Blast and edit the setting Configure drag and drib management.
    2. The Configure elevate and drib management setting is also configurable for PCoIP nether the Computer-half node named PCoIP Session Variables > Overridable Administrative Defaults.
  8. The customer drive redirection prompt configuration is stored in%appdata%\VMware\VMware Horizon View Customer\prefs.txt. You can edit this file to disable the prompt. Come across Rob BeekmansCustomizing the VMware Horizon Client sharing pop-up for more than info.

  9. Horizon 7.10 and newer have some GPO settings for Customer Drive Redirection that permit you command drive letters for customer drives in the remote session. Install the Horizon 7.10 or newer GPO Templates if you haven't already. Edit a GPO that applies to the Horizon Agents. And then notice the settings under VMware View Agent Configuration > VMware Horizon Client Bulldoze Redirection.

Serial Port Redirection

  1. If yous connect to a Horizon Amanuensis that has Serial Port Redirection enabled, so a new icon will appear in the organisation tray.
  2. Right-click the icon to map the remote COM port to the local COM port.

Scanner Redirection

From VMware Blogs Scanner Redirection in Horizon with View: we accept added scanner redirection to Horizon with View for use with both VDI desktops and Remote Desktop Session Host (RDSH) applications and desktops. The new scanner redirection functionality in View works by capturing the unabridged epitome at the client with the scanning device, compressing the epitome, and sending that compressed image to the invitee in the data center, where the image is presented by a "virtual scanner device" to the awarding that requested the image capture. The scanner redirection functionality supports both TWAIN and WIA scanning modes, and allows images to be captured from both scanners and other imaging devices (such equally webcams).

The scanner redirection functionality requires the Horizon Agent version six.0.2 or later, and the Windows Horizon Client three.2 or later.

When you install the Horizon Agent component, exist sure to select the scanner redirection feature if you want to apply it; it is disabled by default. If you lot are installing the feature onto a server-based Bone (Windows Server 2008 R2 or Windows Server 2012 R2) for either VDI desktops or RDSH desktops or applications, then be sure that the Desktop Experience feature (a Microsoft operating organization characteristic) is installed on the server Os commencement. (This is a prerequisite for installing scanners in a server-based OS.)

After a user makes a connectedness from a compatible Windows Horizon Client to the new Horizon Agent, a new tool-tray awarding icon appears. The user clicks the icon to reveal the compatible prototype acquisition devices bachelor for scanning.

The default manner of operation is, however, that "it should just work," and the seamless hosted application should exist able to larn an epitome without needing manual intervention. The user may need to adjust the preferences if more than than one imaging device is connected to the client machine, and the user wants to select a specific scanner, or if the user wants to suit the scan resolution, and so on.

Scanner Redirection Preferences, bachelor by clicking Preferences from the tool-tray icon, allows farther configuration of the scanning process, for example, adjusting the default compression applied to the scanning. This tin can greatly reduce the bandwidth needed to transmit the prototype (the compression is practical on the client side before the paradigm is transmitted to the invitee), simply, of course, the more an epitome is compressed, the lower the paradigm quality. In addition, in the Scanner Redirection Preferences, options are available to adjust the default image capture device (for example, automatic mode, last-used, or an absolute specified device).

These preferences tin can also be adjusted by way of Group Policy options in the guest Bone. A new GPO file (available in the Horizon with View GPO Packet) allows this configuration. SeeConfiguring Scanner Redirection inSetting Up Desktop and Application Pools in View for more information

Scanner Redirection Caveats

From VMware Communities:

  • Scanner redirection does not create a device on your virtual desktop that matches the name of the actual scanner.  It creates a generic scanner in Device Manager called VMWare Virtual WIA Scanner (or VMWare Virtual TWAIN Scanner I am bold).  For us this stinks considering the prototype capture software our client uses (Vertex by Jack Henry), has a prepopulated listing of scanners you lot can select.  So if we plug in a Canon-CR50 and select Canon CR50/80 in the application, it does not recognize that this scanner is attached to the virtual desktop.
    1. There is a tick box choice in the scanner preferences dialog box titled "Use vendor defined names for TWAIN scanners". This should solve the upshot you mention and we added it specifically to cover the problematic use example you mention.
    2. This simply applies to TWAIN scans, WIA can't use the vendor name.
  • Y'all must install a TWAIN or WIA driver on your thin customer.  If you can't find a TWAIN or WIA driver, you lot are out of luck.  For teller check image scanners, we have found no TWAIN or WIA drivers for the TellerScan TS-230, TS-240, or the Canon CR-55.  Nosotros have institute a TWAIN driver for the Canon CR-50 (from the Canon Europe site no less), but upshot #1 to a higher place ways we are out of luck.

Client Printers

Horizon 7.7 and newer with Horizon Client four.ten and newer have a new VMware Integrated Printing (aka VMware Advanced Press) feature that replaces the older ThinPrint technology. ThinPrint is no longer available in Horizon Amanuensis 2006 and newer.

When printing from an application, if you highlight a printer and click Preferences, the VMware Horizon icon on the Layout tab shows you that this printer is using VMware Integrated Press.

If yous open the client printer Properties as an administrator, on the Advanced tab, yous will run into theVMware Universal EMF Driver.

If older ThinPrint:

File Blazon Association

Some published applications might take file types associated with them. When yous double-click a file with the configured extension, yous might be prompted to open up the file using the remote application.

In Horizon Client, if you right-click an icon and click Settings:

It'south also configurable in the client-side registry at HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\VMware, Inc.\VMware VDM\Client past creating a String value at named AllowFileRedirection and setting it to false. See VMware Communities for more information.

Session Collaboration

Horizon 7.4 and newer have anPermit Session Collaboration checkbox in Pool Settings and RDS Farm Settings.

This setting enables aVMware Horizon Collaboration icon in the system tray of the remote desktop, which lets you invite users to collaborate.

The invite is a URL that yous tin run (or click) on the collaborator's car that has Horizon Client 4.seven or newer installed.

To give control to the collaborator, double-click the greenish icon to open the Session Collaboration window. Or open the icon in the system tray.

Operation Tracker

Horizon Agent 7.5 and newer have an optional component called Functioning Tracker.

When installing Horizon Amanuensis, the last option isHorizon Operation Tracker. It is deselected past default.

After information technology's installed in an RDS farm, you lot tin publish the Performance Tracker every bit an Application Pool

Or connect to a Desktop, and launch it from the Desktop icon.

It tin display protocol performance information in graphical or tabular form. The overview UI also shows the proper noun of the Horizon Agent motorcar.

At that place'southward also a Floating Bar choice.

Performance Tracker tin be configured to launch automatically:

  1. Install the Horizon GPO templates if you haven't already.
  2. Edit a GPO that applies to the Horizon Agents. These are Computer settings.
  3. Go toComputer Configuration | Policies | Administrative Templates | VMware Horizon Performance Tracker.
  4. On the right, you'll see ii options for motorcar starting the Operation Tracker.
  5. Both settings let you Evidence or Hide the overview UI.
  6. If Hide is selected, then users can open the Tracker from the systray icon.

HTML Boom

From the Horizon Connection Server webpage, you can click the VMware Horizon View HTML Access link to launch a desktop or application inside your browser. While Internet Explorer 9 is supported, some functionality, like clipboard and audio, is but available in Internet Explorer 10 and newer, Chrome and Firefox.

In Horizon six.2 and later, yous tin can launch applications too as desktops from HTML Smash.

If you click the star icon then you tin Marker the icon as a Favorite. Favorites are stored in the LDAP database on the Horizon Connectedness Server.

Applications and desktops are launched within the browser window. You can click the vertical lines on the left to switch to a unlike application or desktop.

You can open the Copy & Paste console to copy between the local automobile and the remote machine.

Sparse Clients

VMware View Sparse Client Compatibility Guide – Sparse Customer Device and Model Data. It shows thin customer models and the version of Horizon View that is supported with the model.

Repurposed PCs

From Chris HalsteadVMware Horizon View AutoConnection Utility: I decided to write an app in .NET that is essentially a wrapper for the View Client.  It creates the command line variables based on what the user configures in the GUI and automatically connects to the specified desktop or application pool.  All of the user configured information is stored in the registry under the current user hive.

The application silently and automatically connects into either a desktop or application pool each fourth dimension a user logs in by placing it in the startup binder.

Once you have tested your connexion, you are ready to enable AutoConnection.  You enable AutoConnection by checking the "Enable AutoConnection" box.   A common utilize case would exist to place the .exe in the Windows startup folder and then that every fourth dimension a user logs in it will automatically connect to the Virtual Desktop.

This will run the application with the GUI hidden and will automatically connect to the specified pool.   The application will minimize to the system tray and a balloon will bespeak the connection process is occurring.

Horizon Client Group Policy – Security Settings

The Horizon GPO Bundle includes policy templates for the Horizon Client. Encounterhttps://world wide web.carlstalhood.com/horizon-grouping-policy-and-profiles/#viewtemplates to install the ADMX files.

Here are some security GPO settings recommended (VMware Horizon with View Security Hardening Overview) by VMware:

GPO Setting
Computer Config | Policies | Authoritative Templates | VMware Horizon Client Configuration | Scripting definitions

Disable 3rd-party Last Server plugins = enabled
Computer Config | Policies | Authoritative Templates | VMware Horizon Client Configuration | Security Settings

Allow command line credentials  = disabled

Document verification mode = enabled, Full Security

Default value of the 'Log in every bit current user' checkbox = disabled

Brandish option to Log in as current user = disabled

Servers Trusted for Delegation = enabled

Vmware Horizon Client 4.10 Download Mac

Posted by: catessweeme45.blogspot.com

Post a Comment

Previous Post Next Post